学術発表 Publications

原著論文 | 著書 | 解説/総説 | 特許 | 国際会議論文

原著論文（2014年以降）

  1. Surface modification technique of titanium alloy to improve the tribological properties using sub-ns laser irradiation in PAO oil, Xiaoxu LIU, Yoshiki TANAKA, Sho FUJIWARA, Satoru MAEGAWA, Shingo ONO and Fumihiro ITOIGAWA, Journal of Advanced Mechanical Design, Systems, and Manufacturing 17 ( 1 ) No.22-00240 2023年01月
    2. 記事の詳細
  2. High-quality resonances in terahertz composite slabs based on metal gratings, Dejun Liu, Xi Yu, Feng Wu, Jun Cao, Yanliang Zhao, Hui Shi, Shuyuan Xiao, Makoto Kuwahara, Fumihiro Itoigawa, Shingo Ono, Lin Chen and Feng Liu, Journal of Optics 24 105103 2022年09月
    3. 記事の詳細
  3. Improvement of sintered tungsten-carbide surface integrity using femtosecond pulse lasers, Osamu Konda, Xiaoxu Liu, Satoru Maegawa & Fumihiro Itoigawa, The International Journal of Advanced Manufacturing Technology 121 5811 - 5821 2022年07月
    4. 記事の詳細
  4. Influence of Working Surface Temperature on Area Effect in Electrical Discharge Machining Process, Shinya Hayakawa, Fuka Minamia, Fumihiro Itoigawa, Procedia CIRP 113 75 - 80 2022年07月
    5. 記事の詳細
  5. Discussion of Stick-Slip Dynamics of 2DOF Sliding Systems Based on Dynamic Vibration Absorbers Analysis, Satoru Maegawa, Xiaoxu Liu and Fumihiro Itoigawa, Lubricants 10 ( 6 ) 113 2022年06月
    6. 記事の詳細
  6. Non-destructive depth analysis of acidic phosphate ester boundary layers by hard X-ray photoelectron spectroscopy, Naoko TAKECHI-TAKAHASHI, Kensuke MATSUSHIMA, Noritake ISOMURA, Satoru KOSAKA, Mamoru TOHYAMA, Hiroshi MORITANI, Takayuki AOYAMA, Toshinari SANO, Satoru MAEGAWA, Fumihiro ITOIGAWA, Journal of Advanced Mechanical Design, Systems, and Manufacturing 16 ( 3 ) JAMDSM0024 2022年06月
    7. 記事の詳細
  7. 円筒ころ軸受におけるころと保持器の接触力（ころと保持器のダイナミクスに着目した考察）, 鈴木 大輔, 高橋 研, 糸魚川 文広, 前川 覚, 日本機械学会論文集 88 ( 911 ) 22-00153 2022年06月
    8. 記事の詳細
  8. Clarification of the Mechanism of Pulse Laser Grinding of Nanosecond Lasers Using High-Speed Camera Imaging, Xiaoxu Liu, Xianlong Ni, Osamu Konda, Hiroko Furuhashi, Satoru Maegawa and Fumihiro Itoigawa, TMachines 10(3)196 2022年03月
    9. 記事の詳細
  9. 着色剤の分裂現象を利用した転がり軸受のグリース挙動の定量的観察, 小畑智彦，糸魚川文広, トライボロジスト 67 ( 1 ) 54 - 60 2022年01月
    10. 記事の詳細
  10. Terahertz high-Q quasi-bound states in the continuum in laser-fabricated metallic double-slit arrays, Dejun Liu, Xi Yu, Feng Wu, Shuyuan Xiao, Fumihiro Itoigawa, and Shingo Ono, Optics Express 29 ( 16 ) 24779 - 24791 2021年08月
    11. 記事の詳細
  11. Development of High-Performance Polycrystalline CVD Diamond-Coated Cutting Tools Using Femtosecond Lasers, Xiaoxu Liu, Osamu Konda, Hiroko Furuhashi, Kohei Natsume, Satoru Maegawa, and Fumihiro Itoigawa, International Journal of Automation Technology 15 ( 4 ) 413 - 421 2021年07月
    12. 記事の詳細
  12. Femtosecond Laser-Pulse-Induced Surface Cleavage of Zinc Oxide Substrate, Xi Yu, Fumihiro Itoigawa and Shingo Ono, micromachines 12 596 2021年05月
    13. 記事の詳細
  13. Improvement of crystallization in CVD diamond coating induced by femtosecond laser irradiation,Xiaoxu Liu, Kohei Natsume, Satoru Maegawa, Fumihiro Itoigawa, Diamond & Related Materials 107 107883 2020年08月
    14. 記事の詳細
  14. Direct silanol analysis of tribological surfaces using synchrotron radiation, Naoko Takechi, Takahashi Noritake Isomura, Satoru Kosaka, Hiroyuki Mori, Yasuji Kimoto, Toshihide Ohmori, Takayuki Aoyama, Toshinari Sano, Fumihiro Itoigawa, Tribology International 148 106304 2020年8月
    15. 記事の詳細
  15. Micromachining of polycrystalline CVD diamond-coated cutting tool with femtosecond laser, Xiaoxu Liu, Kohei Natsume, Satoru Maegawa, Fumihiro Itoigawa, Journal of Advanced Mechanical Design, Systems, and Manufacturing 14 (4) 2020
    16. 記事の詳細
  16. Improvement of crystallization in CVD diamond coating induced by femtosecond laser irradiation, Xiaoxu Liu, Kohei Natsume, Satoru Maegawa, Fumihiro Itoigawa, Diamond & Related Materials 107 107883 2020年8月
    17. 記事の詳細
  17. Design method for suppressing stick-slip using dynamic vibration absorber, Satoru Maegawa, Fumihiro Itoigawa, Tribology Internatioal 140 ( 11 ) 105866 2019年12月
    18. 記事の詳細
  18. 動吸振器を利用したスティックスリップの抑制に関する研究, 前川 覚, 糸魚川 文広, 日本機械学会論文集C編 Vol.85, No.879 pp. 19-00289-19-00289 2019年10月
    19. 記事の詳細
  19. Theoretical analyses of surface interaction stresses considering two-dimensional periodic material distributions, Hiroshige Matsuoka, Ryoya Miyake, Satoru Maegawa, Shigehisa Fukui, Microsystem Technologies 24 ( 11 ) 4649 - 4657 2018年05月
  20. Mirror Surface Machining of Steel by Elliptical Vibration Cutting with Diamond-Coated Tools Sharpened by Pulse Laser Grinding, Hiroshi Saito, Hongjin Jung, Shamoto Eiji, Shinya Suganuma, Fumihiro Itoigawa, International Journal of Automation Technology 12 ( 4 ) 573 - 581 2018年07月
  21. トランケートされた表面粗さの油膜向上効果に関する研究，竹内博晃, 吉田孝文, 糸魚川文広，トライボロジスト 63 ( 6 ) 416 - 425 2018年06月
  22. Simple Prediction Method for Rubber Adhesive Friction by the Combining Friction Test and FE Analysis, Shingo Ozaki*, Keishi Mieda, Takeru Matsuura, Satoru Maegawa, Lubricants 6 ( 2 ) 38 2018年04月
  23. Study on Material Removal Mechanism in EDM Process through Observation of Resolidification of Molten Metal, Shinya Hayakawa, Kazuaki Minoura, Fumihiro Itoigawa, Takashi Nakamura, Procedia CIRP 68 266 - 271 2018
  24. Size control and luminescence properties of Eu2+ :LiCaAlF6 particles prepared by femtosecond pulsed laser ablation, Yusuke Inoue, Sotaro Muramatsu, Fumihiro Itoigawa,Shingo Ono, Masaaki Sudo, Kentaro Fukuda, Takayuki Yanagida, Journal of Applied Physics 122 ( 13 ) 2017
  25. Carbonization of Silicon Nanoparticles via Ablation Induced by Femtosecond Laser Pulses in Hexane, Xi Yu, Shusaku Terakawa, Toru Asaka, Shingo Ono, Fumihiro Itoigawa, Jun Takayanagi, Arabian Journal for Science and Engineering 42 ( 10 ) 4221 - 4226 2017
  26. Effect of Tangential Loading History on Static Friction Force of Elastic Slider with Split Contact Surface: Model Calculation, Satoru Maegawa, Fumihiro Itoigawa, Takashi Nakamura, Hiroshige Matsuoka and Shigehisa Fukui, Tribology Letters 2017
  27. In-situ observation of formation behavior of adsorption film in the narrow space using surface plasmon resonance (SPR) method, Koki Fukuta, Satoru Maegawa, Fumihiro Itoigawa and Takashi Nakamura, Key Engineering Material
  28. トラクション係数推定に関わる温度とレオロジーモデルの解釈，佐野 敏成, 糸魚川 文広, 井ノ上 雅至，日本機械学会論文集 ( 日本機械学会 ) 16 ( 00421 ) 2016年
  29. Real-Contact Area Between an Elastomer and a Flat Plane Observed by Surface Plasmon Resonance: Optical Model Calculations, Satoru Maegawa, Hiroshige Matsuoka, Shigehisa Fukui, Fumihiro Itoigawa, Takashi Nakamura, Tribology Letters 64 ( 1 ) 7 2016
  30. Effect of surface grooves on kinetic friction of a rubber slider, Satoru MAEGAWA, Fumihiro ITOIGAWA and Takashi NAKAMURA, Tribology International 102 326 - 332 2016
  31. New insight into the mechanism of static friction: A theoretical prediction of the effect of loading history on static friction force based on the static friction model proposed by Lorenz and Persson, Satoru MAEGAWA, Fumihiro ITOIGAWA and Takashi NAKAMURA, Tribology International 102 532 - 539 2016
  32. In situ observation of adsorbed fatty acid films using surface plasmon resonance, Satoru Maegawa, Anna Koseki, Fumihiro Itoigawa, Takashi Nakamura, Tribology International 97 ( May ) 228 - 233 2016
  33. Discussion on Surface Plasmon Resonance Technique in the Otto Configuration for Measurement of Lubricant Film Thickness, Satoru Maegawa, Junya Yamagushi, Fumihiro Itoigawa, Takashi Nakamura, Tribology Letters 62 ( 2 ) 2016
  34. Effects of Stress Distribution at the Contact Interface on Static Friction Force: Numerical Simulation and Model Experiment, Satoru Maegawa, Fumihiro Itoigawa, Takashi Nakamura, Tribology Letters 2016
  35. Two-Layer Tool with Hardness Distribution Around Tool Edge for Reducing Cutting Forces in CFRP Machining, Satoru Maegawa, Shinya Hayakawa, Fumihiro Itoigawa, and Takashi Nakamura, International Journal of Automation Technology 10 ( 3 ) 364 - 371 2016
  36. Improvement of Temperature Prediction Method for Traction Contact, Sano, T., Inoue, M., and Itoigawa, F., SAE International Journal of Engines 9 ( 3 ) 2016
  37. Dynamics in sliding friction of soft adhesive elastomer: Schallamach waves as a stress-relaxation mechanism, Satoru Maegawa, Fumihiro Itoigawa, Takashi Nakamura, Tribology International 96 ( April ) 23 - 30 2016
  38. Observation of Material Removal from Discharge Spot in Electrical Discharge Machining, Shinya Hayakawa, Yusuke Kusafuka, Fumihiro Itoigawa, Takashi Nakamura, Procedia CIRP 42 12 - 17 2016
  39. A role of friction-induced torque in sliding friction of rubber materials, Satoru MAEGAWA, Fumihiro ITOIGAWA and Takashi NAKAMURA, Tribology International 93 ( A ) 182 - 189 2016
  40. Mechanism for changes in cutting forces for down-milling of unidirectional carbon fiber reinforced polymer laminates: Modeling and experimentation, Satoru Maegawa, Yuta Morikawa, Shinya Hayakawa, Fumihiro Itoigawa, and Takashi Nakamura, International Journal of Machine Tools and Manufacture 100 ( Jan. ) 7 - 13 2016
  41. Suppression of tool wear by extremely short-duration cutting, Yuki TERASAKA, Fumihiro ITOIGAWA, Satoru MAEGAWA, Takashi NAKAMURA, Mechanical Engineering Journal 2 ( 6 ) 1 - 8 2015
  42. Development of novel tool for cutting of carbon-fiber-reinforced plastics (Positive use of abrasive wear at tool edge for reduction in cutting force), Satoru MAEGAWA, Shinya HAYAKAWA, Fumihiro ITOIGAWA, Takashi NAKAMURA, Mechanical Engineering Journal 2 ( 6 ) 1 - 13 2015
  43. Effect of normal load on friction coefficient for sliding contact between rough rubber surface and rigid smooth plane, Satoru MAEGAWA, Fumihiro ITOIGAWA and Takashi NAKAMURA, Tribology International 92 335 - 343 2015
  44. Optical measurements of real contact area and tangential contact stiffness in rough contact interface between an adhesive soft elastomer and a glass plate, Satoru MAEGAWA, Fumihiro ITOIGAWA, Takashi NAKAMURA, Journal of Advanced Mechanical Design, Systems, and Manufacturing 9 ( 5 ) 1 - 14 2015
  45. ゴム半球と剛平面の接触における真実接触面積の接触応力依存性とその簡易推定法，前川覚，糸魚川文広，中村隆，日本機械学会論文集 81 ( 830 ) 2015年
  46. Effects of fiber orientation direction on tool-wear processes in down-milling of carbon fiber-reinforced plastic laminates, Satoru Maegawa, Yuta Morikawa, Shinya Hayakawa, Fumihiro Itoigawa, and Takashi Nakamura, International Journal of Automation Technology 9 ( 4 ) 356 - 364 2015
  47. 表面微細テクスチャによる切削工具・切りくず間の付着拘束緩和が加工力低減に及ぼす影響，清田大樹，糸魚川文広，中村隆，精密工学会誌 81 ( 5 ) 452 - 458 2015年
  48. Size Effect in Machining on Initial Tool Wear in Heat-Resistant Alloy Cutting, Hiroki HAYAMA, Hiroki KIYOTA, Fumihiro ITOIGAWA, Takashi NAKAMURA, Key Engineering Materials 656-657 357 - 362 2015
  49. High Precision Turning of Hardened Steel by Use of PcBN Insert Sharpened with Short Pulse Laser, Yusuke MABUCHI, Fumihiro ITOIGAWA, Takashi NAKAMURA, Keiichi KAWATA, Tetsuro SUGANUMA, Key Engineering Materials 656-657 277 - 282 2015
  50. A Novel Cutting Concept of CFRP Composites for Extending the Life of Tool, Satoru MAEGAWA, Yuta Morikawa, Shinya HAYAKAWA, Fumihiro ITOIGAWA, Takashi NAKAMURA, Key Engineering Materials 656-657 198 - 203 2015
  51. Experimental research of micro-textured tool for reduction in cutting force, Hiroki Kiyota, Fumihiro Itoigawa, Takashi Nakamura, Key Engineering Materials 611-612 1258 - 1263 2014
  52. 放電加工の極間隙における気泡の合一と加工現象の関係，今井進也, 早川伸哉, 糸魚川文広, 中村隆，電気加工学会誌 48 ( 117 ) 22 - 27 2014年

著書

  1. CFRP/CFRTP成形・加工・接合技術，邊 吾一, 中村 隆, 深川 仁, 石根 希望, 水谷 義弘, 岡島 いずみ, 糸魚川 文広 (担当： 共著 )，S&T出版 2016年03月 ISBN: 978-4-907002-53-4

解説/総説（2014年以降）

  1. 低面圧滑り案内面のグリース潤滑の試み，糸魚川文広，トライボロジスト 62 ( 9 ) 575 2017年
  2. 表面プラズモンを利用した潤滑膜のその場観察，前川覚，糸魚川文広，トライボロジスト 64 ( 11 ) 2019年

特許

  1. 振動減衰用質量デバイス、振動減衰用質量デバイスセット及び振動減衰方法，特願 特願2018-194027 ，前川覚，糸魚川文広，稲垣宏紀
  2. 切削工具及び切削方法，特願 特願2016-051272号，山崎 真, 永見 志郎, 丸井 順一, 西岡 良樹, 目黒 貴一, 小田 陽平, 糸魚川 文広
  3. レーザー加工装置、制御装置および加工面形成方法，特願 特願2015-38888，糸魚川文広，前川覚
  4. 二層切削工具，特願 特願2014-162862，糸魚川文広，前川覚
  5. 繊維強化樹脂積層体部品の切削加工による製造方法，特願 特願2013-203260，糸魚川文広，前川覚
  6. 金属系部材およびその製造方法，特願 特許出願２０１１－１１３０７９ 特開 特許公開２０１２－２４１２３８，森広行, 糸魚川文広, 榊原亜里紗, 日比野秀徳
  7. 切削加工方法，特願 特願2010-22422 特開 特開2011-156644，則久孝志，糸魚川文広，河田圭一，石川和昌
  8. レーザーを用いた部材の接合方法，特願 特願2009－127301 特開 特開2010-274279，早川伸哉，大村崇，糸魚川文広，中村隆，長谷川達也
  9. 転がり案内面の潤滑方法，特願 特願2007-089483 特開 特開2008-248991，須田聡，中尾元，糸魚川文広
  10. 転がり案内面の潤滑方法，特願 特願2007-089414 特開 特開2008-248990，須田聡，中尾元，糸魚川文広
  11. 放電加工方法及び放電加工装置，特願 特願2005-331253 特開 特開2007-038391，早川伸哉，須藤優美香，大宮健司，中村隆，糸魚川文広
  12. 摩擦試験装置，特願 特願2003-109033 特開 特開2004-317196 特許 特許4074215，則久孝志，糸魚川文広
  13. 創製放電加工機およびその制御方法，特願 特願2000-289118 特開 特開2002-103145，早川伸哉，糸魚川文広，中村隆，松原十三生
  14. 微細放電加工法，特願 特願平11-304866 特開 特開2001-121352 特許 特許3863328，糸魚川文広，早川伸哉，中村隆，松原十三生
  15. 圧電振動モータ，特願 特願昭62-092240 特開 特開昭63-262069 特許 特許2569545，稲垣光男，小島昭和，糸魚川文広
  16. 切削加工方法，特開 CN 102139387，則久孝志，糸魚川文広，河田圭一，石川和昌

国際会議論文（2014年以降）

  1. Coating Failure Property of CVD Diamond Coated Tool in Machining of Sintered WC-Co, Erina SAHASHI, Fumihiro ITOIGAWA, Tomoya MINAMI, Takashi NAKAMURA, Proceedings of Leading Edge Manufacturing in 21st Century 2017
  2. Effect of micro-structure of medium density fiberboard on cutting forcevariation with cutting speed, Akinobu NAKAMURA, Fumihiro ITOIGAWA, Takashi NAKAMURA, Proceedings of Leading Edge Manufacturing in 21st Century 2017
  3. Principal Factors Control Tool Wear in High-speed Cutting of Titanium Alloy, Sho NEGITA, Fumihiro ITOIGAWA, Shinya HAYAKAWA, Takashi NAKAMURA, Proceedings of Leading Edge Manufacturing in 21st Century 2017
  4. Effects of Gripping Force ofHydraulic Three-Finger PowerChuckon Modal Stiffness and Tool Life, LifeKazunori FUJISE, Keita MIZUNO, Fumihiro ITOIGAWA, Hironari ISHIHARA, Takashi NORIHISA, Yosuke ICHIGI, Proceedings of Leading Edge Manufacturing in 21st Century 2017
  5. Effect of Stable Saw-tooth Chip Formation on Depth-of-Cut Notch Wear in Ni-based Heat-Resistant Alloy Cutting, Ruiqiang YE, Fumihiro ITOIGAWA, Takashi NAKAMURA, Proceedings of 16th International Conference on Precision Engineering C109 ( 8246 ) 2016
  6. Reduction in Microscopic Surface Defects of cBN Tool with Short-pulse Laser Processing and Its Improvement of Cutting Performance for Hardened Steel, Ryohei USUI, Fumihiro ITOIGAWA, Kohei KATO, Takashi NAKAMURA, Proceedings of 16th International Conference on Precision Engineering ( Japan Society of Precision Engineers ) C102 ( 8198 ) 2016
  7. Feasibility Study on High Speed Machining of Cast Iron with Sharpened Cutting Tool Formed by Short Pulse Laser, Kohei KATO, Fumihiro ITOIGAWA, Ryusuke USUI, Takashi NAKAMURA, Proceedings of 16th International Conference on Precision Engineering ( Japan Society of Precision Engineers ) C103 ( 8200 ) 2016
  8. Mirror Surface Machining of Die Steel by Elliptical Vibration Cutting with Diamond Coated Tools Sharpened by Pulse Laser Grinding, Hiroshi SAITO, Hongjin JUNG, Eiji SHAMOTO, Shinya SUGANUMA, Fumihiro ITOIGAWA, Proceedings of 16th International Conference on Precision Engineering ( Japan Society of Precision Engineers ) C108 ( 8150 ) 2016
  9. Investigation of Tool Wear Process and Cutting Forces in Machining to Carbon-fiber-reinforced Plastics Composites, Satoru MAEGAWA, Shinya HAYAKAWA, Fumihiro ITOIGAWA, Takashi NAKAMURA, Proceedings of 7th International Conference on Tribology in Manufacturing Process 370 - 374 2016
  10. Reduction of Cutting Tool Wear Using Extremely Short Time Intermittent-Cutting, Yuki TERASAKA, Fumihiro ITOIGAWA, Satoru MAEGAWA, Takashi NAKAMURA, Proceedings of 7th International Conference on Tribology in Manufacturing Process 385 - 389 2016
  11. Wear and Failure of CVD Diamond Coated Tool in End-milling of WC-Co Die Materials - Influence of Particle Size of WC Powder and Depth of Cut -, Tomoya MINAMI, Fumihiro ITOIGAWA, Satoru MAEGAWA, Takashi NAKAMURA, Proceedings of 7th International Conference on Tribology in Manufacturing Process 380 - 384 2016
  12. Tool Wear Properties of Sharpened CVD Diamond Coated Tool in Turning of Cemented Carbide Rod, Shinya Suganuma, Fumihiro Itoigawa, Shinya Hayakawa, Satoru Maegawa, Takashi Nakamura, Proceedings of 7th International Conference on Tribology in Manufacturing Process 375 - 379 2016
  13. Development of Otto-ATR Raman spectroscopy for thin lubricant films, S. Yada, S. Maegawa, F. Itoigawa, T. Nakamura, Proceedings of Malaysian International Tribology Conference 2015 167 - 168 2015
  14. Measurements of surface displacement field for multi-contact interface of elastomers, S. Maegawa, F. Itoigawa, T. Nakamura, Proceedings of Malaysian International Tribology Conference 2015 82 - 83 2015
  15. Novel design concept for Rayleigh step bearing with high robustness against step height change due to frictional wear, Shunsuke Mori, Satoru Maegawa, Fumihiro Itoigawa, Takashi Nakamura, Proceedings of Malaysian International Tribology Conference 2015 80 - 81 2015
  16. SPR microscopy with ATR Otto configuration for observing thin boundary lubrication films, J. Yamaguchi, S. Maegawa, F. Itoigawa, T. Nakamura, Proceedings of Malaysian International Tribology Conference 2015 169 - 170 2015
  17. Development of novel computer generated hologram (CGH) for short pulse laser processing of precise micro pattern using spatial light modulator, Kyoshi INOUE, Takumi SATO, Fumihiro ITOIGAWA, Shingo, ONO, Takashi NAKAMURA, Proceedings of The 8th International Conference on Leading Edge Manufacturing in 21st Century 2015
  18. Basic Study on Failure Process of CVD Diamond Coating Tool in Machining of Cemented Carbide Materials, Tomoya MINAMI, Fumihiro ITOIGAWA, Satoru MAEGAWA, Takashi NAKAMURA, Proceedings of The 8th International Conference on Leading Edge Manufacturing in 21st Century 2015
  19. Suppression of Tool Wear by Extremely Short Time Cutting in Machining of Inconel 718, Yuki TERASAKA, Fumihiro ITOIGAWQA, Satoru MAEGAWA, Takashi NAKAMURA, Proceedings of The 8th International Conference on Leading Edge Manufacturing in 21st Century 2015
  20. Hydrodynamic Lubrication Analysis on Friction Properties at Interface between Textured Rotary Cutting Tool and Chip, Tomoko HIYRAYAMA, Toshiteru SUZUKI, Fumihiro ITOIGAWA, Keiichi KAWATA, Hideya KODAMA, Proceedings of The 8th International Conference on Leading Edge Manufacturing in 21st Century 2015
  21. Enhancing Cutting Performance of Diamond Coating Tool by Edge Sharpening with Short Pulse Laser, Shiya SUGANUMA, Fumihiro ITOIGAWA, Shinya HAYAKAWA, Satoru MAEGAWA, Takashi NAKAMURA, Proceedings of The 8th International Conference on Leading Edge Manufacturing in 21st Century 2015
  22. High Precision Turning of Hardened Steel by Use PcBN Inser Sharpened with Short Pulse Laser, Yusuke Mabuchi, Fumihiro Itoigawa, Takashi Nakamura, Keiichi Kawata and Tetsuro Suganuma, Proceedings of International Conference on Machining, Materials and Mechanical Technologies 2014
  23. Size Effect in Machining on Initial Tool Wear in Heat-resistant Alloy Cutting, Hiroki Hayama, Hiroki Kiyota, Fumihiro Itoigawa and Takashi Nakamura, Proceedings of International Conference on Machining, Materials and Mechanical Technologies 2014
  24. A Novel Cutting Concept of CFRP Composites for Extending the Life of Tool, Satoru Maegawa, Yuta Morikawa, Shinya Hayakawa, Fumihiro Itoigawa and Takashi Nakamura, Proceedings of International Conference on Machining, Materials and Mechanical Technologies 2014